



Expanders, Penrose (Auckland) and Belfast (Christchurch)
DesignerPod™ V3
$37,500incl. GST
Slide-out unit that opens to 23 m² with a bedroom, L-shaped kitchenette, bathroom with corner shower and a 180° double-glazed sliding glass wall.
- Price
- From $37,500 GST incl. · delivery quoted separately
- GST
- incl. GST
- Floor area
- 23 m²
- Price per m²
- $1,630
- Bedrooms
- 1 bed
- Bathrooms
- 1
- Loft
- No
- Type
- Transportable
- Lead time
- Approximately 4 months from order to delivery
- Builder
- Expanders, Penrose (Auckland) and Belfast (Christchurch)
Everything here is from Expanders's own website, read 2026-11-01.
What the price includes
- Slide-out mechanism opens to 23m² of living space
- 180° panoramic double-glazed sliding wall
- Steel frame with grand grey epoxy finish
- EPS-insulated walls and roof
- MGO flooring with Premium SPC Flooring
- Full bathroom with corner shower, vanity & soft-close toilet
- L-shaped kitchenette with quartz benchtop
- Pre-wired to NZ standard, AC-ready
Not included
- Hot water system
- Installation (must be done by a qualified local installer)
- Delivery (quoted separately)
How it's built
- Cladding
- Standard EPS panel; premium exterior cladding optional
- Framing
- Steel frame with grand grey epoxy finish
- Insulation
- EPS-insulated walls and roof
Compliance, warranty and delivery
- What the builder says about compliance
- Builder states Expanders may not meet NZ requirements for use as a permanent dwelling; commonly used as transportable units, caravans or temporary dwellings; buyer must check with council
- Warranty
- 3-year structural and 1-year fixtures, fittings and finish warranty
- Delivery
- Delivery quoted separately; NZ-wide delivery usually ranges from $1,000–$4,000 per unit depending on distance from Christchurch; shipped in container form and delivered by HIAB truck
Published options
- Premium exterior cladding +$1,500
- Luxury bamboo fibreboard lining +$1,500
- Trailer – 20ft +$12,000
See the floor plan on Expanders's site
Which consent rules could apply?
Based on its published size and type. Your site and how you use it decide the final answer.
Questions people ask
How much is the DesignerPod™ V3?
Expanders lists it as "From $37,500 GST incl. · delivery quoted separately" (incl. GST), read on 2026-11-01. Not included: hot water system, installation (must be done by a qualified local installer), delivery (quoted separately). Check the current price with the builder.
How big is the DesignerPod™ V3?
23 m², 1 bed.
Does the DesignerPod™ V3 need a building consent?
It depends on your site and how it's used. Based on its published size and type: up to 70 m²: granny flat exemption. Confirm with your council.
Similar models from other builders
More from Expanders
Rhyno Lounge & BathroomExpanders · 18 m²$16,790
The Studio – Open PlanExpanders · 13 m²$20,000
The StudioExpanders · 13 m²$24,500
20ft Expander – Open PlanExpanders · 36 m²$34,000
DesignerPod™ V3 – Open PlanExpanders · 23 m²$37,500
20ft Expander – 1 BedExpanders · 36 m²$39,200
20ft Expander – 1 Large BedroomExpanders · 36 m²$39,200
20ft Expander – 2 BedExpanders · 36 m²$40,275
Pod Spaces 6231-SOP
BoxFront Studio
FlatTop Studio
6m × 3m Studio Tiny Home
Pod Spaces 6231-SOPE