



Cabin (10m x 2.8m)
$109,995GST not stated
A 10 m × 2.8 m (28 m²) portable cabin with one large bedroom, a painted Shadowclad exterior and coloursteel roof.
- Price
- $109,995
- GST
- GST not stated
- Floor area
- 28 m²
- Dimensions
- 10 × 2.8 m
- Price per m²
- $3,928
- Bedrooms
- 1 bed
- Type
- Transportable
- Builder
- Unit2Go
Everything here is from Unit2Go's own website, read 2026-11-01.
What the price includes
- Fully painted
- Timber floor on steel support bearers
Not included
- Delivery (prices are ex factory)
- On-site costs unless specifically quoted
- Craning over houses or fences (extra cost)
How it's built
- Cladding
- Shadowclad ply (painted)
- Roofing
- Coloursteel
- Framing
- Insulated timber frame walls with cavity; grooved MDF interior lining
- Insulation
- Insulated timber frame walls
Compliance, warranty and delivery
- What the builder says about compliance
- Built to the NZ Building Code; described as council-consented builds; Licensed Building Practitioner. Resource consent or a building permit may be needed for your location.
- Warranty
- Minimum 10-year watertightness and structural warranty (stated as required by law)
- Delivery
- Delivered and set up anywhere in the North Island by Unit2Go's own truck and trailer (units up to 70 m²), onto blocks or piles. Prices are ex factory; delivery starts from $750 for 2.4m-wide units and larger units are quoted.
See the floor plan on Unit2Go's site
Which consent rules could apply?
Based on its published size and type. Your site and how you use it decide the final answer.
Up to 30 m²: sleepout exemptions
With no toilet, shower or kitchen sink, a detached building this size can be built without a building consent if it meets the Schedule 1 conditions.
Up to 70 m²: granny flat exemption
A new, single-storey, stand-alone home this size can skip building consent under Schedule 1A if it meets the conditions, with licensed builders and a PIM.
Questions people ask
How much is the Cabin (10m x 2.8m)?
Unit2Go lists it as "$109,995" (GST not stated), read on 2026-11-01. Not included: delivery (prices are ex factory), on-site costs unless specifically quoted, craning over houses or fences (extra cost). Check the current price with the builder.
How big is the Cabin (10m x 2.8m)?
28 m², 10 × 2.8 m, 1 bed.
Does the Cabin (10m x 2.8m) need a building consent?
It depends on your site and how it's used. Based on its published size and type: up to 30 m²: sleepout exemptions; up to 70 m²: granny flat exemption. Confirm with your council.
Similar models from other builders
More from Unit2Go
10S Backyard Office StudioUnit2Go · 11.4 m²$26,995
Sleep Out (4.1m x 2.4m)Unit2Go · 9.84 m²$28,995
Compact Cabin (6m x 2.8m)Unit2Go · 16.8 m²$69,995
15S Open Plan StudioUnit2Go · 15 m²$76,995
20S Self-Contained StudioUnit2Go · 20.4 m²$86,995
Small Cabin (7.2m x 2.8m)Unit2Go · 20.16 m²$89,995
25S Compact One Bedroom CabinUnit2Go · 26.4 m²$94,995
Cabin (10m x 2.8m) - 1 BedroomUnit2Go · 28 m²$109,995
Escape 1131-S1USB
Freedom 8639-S1SB+
1-Bed Home 30m²
The Ponsonby
10m × 3m Tiny Home
Freedom 1231-S1SB